Metalic Pumps - Air Operated Double Diaphragm Pumps

Air Operated Double Diaphragm Pumps

Design features

Air operated diaphragm pumps are reciprocating pumps where the working elements are flexible diaphragms. The drive is by means of compressed air acting directly upon the diaphragm. Another possibility is hydraulically drive instead of compressed air. At least two valves, one on the discharge and one on the suction side, are necessary. Several types of valves are used. The most popular valves are flap, cylindrical and ball valves.

Air-operated double diaphragm pump is a self promised pump to work hard against huge number of Liquids and atmosphere , donate driver seat to user.

It can move anything from fine chemicals (gentle, non-shearing action), to abrasive and viscous slurries
(no close-fitting parts, low internal velocities), and almost any other product.


Quick Links



PVDF Pumps, PTFE Pumps, Gear Pumps, Sewage pumps, Barrel pumps, Dewatering pumps, Metering pumps IMMEDIATE TELE CONTACT :
     +91 9920725712


PVDF Pumps, PTFE Pumps, Gear Pumps, Sewage pumps, Barrel pumps, Dewatering pumps, Metering pumps URGENT INQUIRY CONTACT:
     sales@rhodekpumps.com




Technical Specifications – Models availability
Performance chart
Parameters MODEL AOD - 15
Flow Rate 0 to 25 LIT/M
Suction 19 mm (3/4" BSP)
Delivery 19 mm (3/4" BSP)
Air Inlet 16 mm (1/4" BSP)
Air Exhaust 15 mm (1/2" BSP)
Suction Lift Rubber
3 Mtrs (Dry) 5 Mtrs (Wet)
  Teflon
1.5 Mtrs (Dry) 3 Mtrs (Wet)
Max Particle Size 1.6 mm

 

Parameters MODEL AOD - 30
Flow Rate 0 to 110 LIT/M
Suction 25 mm (1" BSP)
Delivery 25 mm (1" BSP)
Air Inlet 10 mm (3/8" BSP)
Air Exhaust 19 mm (3/4" BSP)
Suction Lift Rubber
3 Mtrs (Dry) 5 Mtrs (Wet)
Teflon
2 Mtrs (Dry) 4 Mtrs (Wet)
Max Particle Size 3 mm

 

Parameters MODEL AOD - 40
Flow Rate 0 to 230 LIT/M
Suction 40 mm (1.5" BSP)
Delivery 10 mm (3/8" BSP)
Air Inlet 20 mm (3/4" BSP)
Air Exhaust Rubber
3 Mtrs (Dry) 5 Mtrs (Wet)
Teflon
2 Mtrs (Dry) 4 Mtrs (Wet)
Suction Lift 5 mm
Max Particle Size 3 mm

 

Parameters MODEL AOD - 55
Flow Rate 0 to 450 LIT/M
Suction 50 mm (2" BSP)
Delivery 50 mm (2" BSP)
Air Inlet 12.5 mm (1/2" BSP)
Air Exhaust 20 mm (3/4" BSP)
Suction Lift Rubber
4 Mtrs (Dry) 5 Mtrs (Wet)
Teflon
2 Mtrs (Dry) 3 Mtrs (Wet)
Max Particle Size 6 mm

 

Parameters MODEL AOD - 80
Flow Rate 0 to 600 LIT/M
Suction 80 mm (3" BSP)
Delivery 80 mm (3" BSP)
Air Inlet 20 mm (3/4" BSP)
Air Exhaust 25 mm (1" BSP)
Suction Lift Rubber
3 Mtrs (Dry) 6 Mtrs (Wet)
Teflon
2 Mtrs (Dry) 5 Mtrs (Wet)
Max Particle Size 7 mm


Performance chart



Versatile Performance Features

  • Can run dry indefinitely without damage.
  • No shaft seals or gland packing.
  • Infinitely variable flow & discharge pressure from 0 to pump's maximum by adjusting air pressure.
  • Gentle non-shearing action.
  • If discharge is clogged or closed pump stops immediately; no power consumed, no heat, no wear. By opening discharge, flow starts automatically.
  • Operates submerged or with flooded suction.
  • LSelf-priming from a dry start.
  • Pressures up to 100 PSI (7 bar).
  • No close fit, sliding or rotating parts. Low internal velocity reduces wear.
  • Quick assembly/disassembly with split clamp bands.
  • Capable of pumping at high temperatures.
  • Quiet, steady discharge flow without use of pulsation dampener.
  • Safe for use in explosive environments. No electrical hazards or costly motor and control equipment needed.
  • No pressure relief or bypass piping required because pump pressure never exceeds air inlet pressure.
  • Pollution-free operation. The pump even improves air environment in confined areas.

Applications :
  • Paints & solvents
  • Dyes
  • Pigments
  • Resins
  • Beer & wine
  • Mine tailings
  • Chemicals
  • Oils & lubricants
  • Glues & adhesives
  • Construction water & waste
  • Foods & Beverages
  • Tanker loading/unloading
  • Marine barges
  • Ceramic slips, slurries & glazes
  • Latex
  • Driller's mud
  • Inks & printing liquors
  • Against filter press
  • Low density powders
  • Handling Barrels, Jerry Cans, Carboys
Top

Copyright © 2010 Rhodek Pumps