Normal non clog sewage pumps

Single vane impeller

• Working Principle

Our single pumps is designed for automatic use (single phase version), the operating principle is that of pumps with single vane impeller, the impeller mounted on the end of the drive shaft enclosed in a large ring chamber, formed by the pump body and the base. The suction opening is in direct contact with the liquid to be pumped. The rotating impeller transmits kinetic energy to the liquid, which is centrifuged in the ring chamber, where part of the kinetic energy is transformed into pressure energy. The particular shape of the impeller optimizes efficiency.

• Pump Installation And Applications
This pumps is designed to handle dirty water and sewage in domestic and civil applications, it is fitted with a stainless steel single vane impeller, and suitable for pumping liquids containing suspended solids, including short fibres. It is particularly recommended for the transfer of domestic sludge, effluent and surface water, water mixed with mud in areas, such as: household, industrial applications and underground car parks.
This pump is particularly dependable in fixed installation intended for automatic use. A purposely built pit with minimum dimensions 500x500xS00mm is recommended for fixed installations, to give total drainage, and to allow correct operation of the automatic float switch, this system automatically starts the pumps when the fluid reaches a preset level, stopping it once the fluid has been emptied.

These pumps are basically used for medium sludge.

 

Please left click to see catalogue and right click to save.