Special Application Pumps

We do accept order for specialized pumps as per sea water applications where plastic is replaceable, Very high corrosive liquids etc.

Size ½", 1", 1½"" and 3" inch suction and delivery

Material of Construction :

Visit us at www.aodpumps.in

Size - 1 to 12-inch suction and delivery

Alloy – 20 , Hastelloy , CDM4CU, Super duplex materials

Special mechanical sealing available

Size - 25 mm , 40 mm, 65 mm , Motor up to 7.5 hp

In alloy – 20 , Hastelloy , CDM4CU, Super duplex materials

Design Features:

High head low capacity pump.
Available in alloy steels.
Excellent for handling solvents from barrels and from tank farms to the charging vessels.
Seal leakage can easily be detected from window in priming chamber.
Pump can take negative lift from 3 to 5 meters.
Maintenance is easier, drain arrangement is standard.
Compact design - requires less space, no grouting required

Range Of Product:

Advantages:

Low NSPH required
Life lubricating bearings covered from both the ends so minor leakage from pump side does not affect bearings.
Being a low speed (1450 RPM) pump, Less Maintenance is needed.
Installation is easier since motor required is vertical flange type and is directly coupled to the pump, coupling alignment is simpler.
Low overhang shaft arrangement giving minimum deflection at the seal faces.
Floating type impeller reduces noise and vibration.
Available only with mechanical seal (internal mounted), rotary faces of Carbon and Glass Filled Teflon (GFT) are optional.
Seal cooled and flushed by process fluid itself.
Minor leakage at suction side does not affect pump performance.
Biggest advantage from installation point of view is that since it is an "in line" type pump, it can be fitted as a valve and hence it will not require any suction or delivery piping effort

Sizes up to 12 inch

In alloy – 20 , Hastelloy , CDM4CU, Super duplex materials and many more.

Special mechanical sealing available